Heavy Duty Floor Mat inSPORTline Proteko II 50 x 50 x 3 cm
26,10 €
In Stock
Every commercial gym should have the Leg Press & Hack Squat Machine inSPORTline X-NT L10! Two exercise machines all in one, this bad boy will help you tone your leg muscles, allowing you to target your thighs, glutes, quads, hamstrings and calves. Boasting adjustable platforms with supports, it provides an effective and professional workout at any performance level.
The resistance is adjusted by adding/removing weight plates, with the maximum weight being 300 kg. And since the top part of the cover can be unscrewed, you can use both 50-mm and 25-mm weight plates. The machine can accommodate users up to 200 kg in weight, which makes it suitable even for the heaviest of users. The rail is tilted at an angle of 45 degrees. Getting from one station to another only takes a couple of seconds – all you have to do is fold up/unfold back supports at either side of the machine, and you’re ready to go.
Hack Squat
This setting allows you to perform hack squats, which are good for strengthening not only your legs but also stabilizer muscles and core. The arm, back and head supports are heavily padded to provide ultimate comfort. The machine was designed to spread the load evenly, i.e. not to put more pressure on some muscle groups than others. It’s a prefect alternative to dumbbell squats.
Leg Press
If you want to do leg presses, all you have to do is unfold the back support on the rail and secure it in place. What you’ll get is a sturdy platform with an anti-slip surface that provides a reliable leg support. What’s more, the bottom platform can be adjusted to three different positions, allowing you to find an ideal position for your thigh presses.
Safety
On both stations, the weight plates are secured in place with a safety, which is easily reachable from both positions, so you can start/finish your workout while sitting down or standing up.
Technical description:
- 2 workout stations all in one
- Adjustable back support (Leg Pres) / adjustable leg support angle (Hack Squat)
- Anti-slip leg supports
- Weight plate-based resistance
- Safety lever for securing the rail in place in both positions
- Folding back support on the bottom platform
- High-quality comfortable padding
- 2 weight plate storage pegs
- Frame material: steel
- Padding material: EPE
- Padding thickness: 5 cm
- Dimensions of the padded parts:
- Leg press back support: 76 x 28.5 cm
- Leg press seat: 51 x 21 cm
- Hack squat back support: 55.5 x 39 cm + 51 x 13 cm
- Total height of hack squat back supports: 61 cm
- Head support: 19 x 18 cm
- Shoulder supports: 17 x 12.5 cm
- Rail angle: 45 degrees
- Frame profile: 70 x 50 x 2 mm / 50 x 50 x 2 mm
- Weight plate storage peg diameter: 50 mm (the diameter of the weight plates can be adjusted to 25 mm by unscrewing the top part of the cover)
- Length of the loading part of the storage pegs: 28 cm
- Machine dimensions: L 218 x W 153 x H 134 cm
- Package dimensions: 3 boxes (1x 182 x 42 x 17 cm; 1x 84 x 81 x 22 cm; 1x 75 x 58 x 21 cm)
- Dimensions of the platform for the Leg Press: 53 x 38 cm
- Weight of platform for Leg Press: 8.5 kg
- Weight: 124 cm
- Max user’s weight: 200 kg
- Max load weight: 300 kg
- Category: S (ISO EN 20957) – suitable for commercial use
- Weight plates are not included
