Electric Longboard WORKER Smuthrider
Plastic deck, Bluetooth remote control, 2 speed modes, reverse mode, cut-out handle in deck.
Electric Longboard WORKER Smuthrider
The Electric Longboard WORKER Smuthrider is a unique kind of longboard with an electric motor built into the rear wheel. The motor is powered by the integrated Samsung lithium battery, which charges to full capacity in 2 to 3 hours and provides a 12km distance range.
Its light weight (4.8kg), compact size (79cm/31”) and cut-out handle in the deck allows you to easily carry the longboard around when you are not riding on it. The deck made of Canadian maple features an anti-slip grip tape which prevents you from slipping and falling off the longboard. The graphic printing on the grip improves the overall design of the longboard. The 75mm wheels will deal with an uneven surface. Moreover, they also provide excellent stability on paved roads and/or bike trails. The wide, 5” aluminum trucks allow for easy turning. Last but not least, the Electric Longboard WORKER Smuthrider features the high quality, high-speed ABEC 7 bearings.
The Electric Longboard WORKER Smuthrider is controlled with an ergonomic, Bluetooth remote control (wireless), which allows you to regulate speed (max speed: 20kph) and brake. Moreover, the remote control also allows you to switch to the reverse mode and go in the opposite direction. Beginners may also appreciate the safer, slow speed mode.
Note: Store the battery in a dark and dry place in temperatures from 10°C to 20°C. When you are planning not to use it for a long time, charge it to full capacity and then recharge it every six months.
- 2 speed modes
- Reverse mode
- Cut-out handle in deck
- Deck dimensions: 31” x 8” (79 x 20.5cm)
- Deck material: polypropylene (plastic)
- Weight limit: 100kg
- Maximum speed: 20kph (10kph in slow speed mode)
- Range on single charge: 12km
- Weight: 4.8kg
- Motor: brushless; in rear hub
- Motor power: 180W
- Trucks material: high performance aluminum
- Trucks width: 5”
- Wheel size: 75*56mm
- Wheel hardness: 85A
- Wheel material: PU rubber
- Remote control: 2.4GHz, wireless, Bluetooth (power supply: 2 x AAA battery – not included)
- Battery: 36V, 2.2Ah Lithium-Ion Samsung accumulator
- Charging time: 2-3 hours
Warning: Store the battery in a dry place and away from light, with room temperature between 10°C and 20°C. Before storing it for a longer period of time, charge the battery to full capacity. Repeat the process every month.
By following these instructions, the rated capacity of the battery will not fall below 70% of its total capacity within 12 months of purchase.
Electric Longboard WORKER Smuthrider - Documents to download
Electric Longboard WORKER Smuthrider - Product parameters
The length of the board is basically the length of the entire item. The longer the board, the more space there is. On the other hand, shorter boards are easier to carry around. The length is usually given in inches. 1 inch = 2.54 cm.
The ABEC-1 through ABEC-9 scale denotes the presision of the manufacture process. The higher the number, the more precisely the bearings are made (smaller margin). Other scales are used mainly on children's skates.
Boards are usually made of wood. The highest quality you can get is Canadian maple. Other types of wood present more affordable options.
The cheapest option are boards made of PVC or other plastic material. Aside from price, their advantage lies also in high durability. However, we recommend them mainly for beginners, only occasional riders and children. They are also not really suitable for stunts. The exception are penny boards, where the majority of products is made of plastic.
These days, most skateboard, penny board and longboard wheels are usually made of the same material - polyurethane (PU) with various admixtures. It's because these wheels have good riding qualities and are resistant to damage. Wheels made of PVC are recommended mainly for children. Their advantage is a low price.
By observing the weight limit of the product, you significantly increase its service life and prevent it from wearing down prematurely. It is not recommended to exceed this limit.
Standard board width ranges between 17.5 cm (7") and 21 cm (8.25"). However, there are both wider and narrower models. Generally speaking, narrower boards under 20.1 cm (8") are better for beginners or riders that are not that tall. Wider boards are more suitable for advanced and taller riders.
The thickness of the board goes hand in hand with the number of layers and material used. The thicker the board, the more durable it is. However, it's also heavier.
To beginners, we recommend using boards of average thickness, starting with a good compromise between weight and durability.
Wheel hardness between 76A and 90A is ideal for casual skating.
Wheel hardness over 90A is better suitable for speed and race skating.