WORKER ABEC 1 bearings
Bearings intended for in-line, scooters and skateboards - 8 pcs/pack.
Recommended accessories
- Description
- Parameters
- Alternatives (1)
WORKER ABEC 1 bearings
The Bearings WORKER ABEC 1 are precise, have a long lifespan, low friction (they spin smoothly) and are easy to maintain. They are intended for roller blades, skateboards, longboards, penny boards and scooters.
Technical description:
- High precision
- Shields on each side to keep dirt and dust out
- Long lifespan
- Low rolling resistance
- Recommended max. load: up to 60 kg
- Outer diameter: 22mm
- Inner diameter: 8mm
- Width: 7 mm
- Pack contains 8 pieces (for roller blades you will need 16, for boards 8 and for scooters 4)
WORKER ABEC 1 bearings - Product parameters
The ABEC standard denotes the precision of bearings manufacture. It describes the possible margin of error. The higher the number, the more presicely made the bearings are. The cheapest skates feature ABEC 3 bearings. The most common are ABEC 5 and ABEC 7 bearings. Fast skaters should look for bearings of the highest quality, that is ABEC 9.
An outer diameter means the diameter of the entire bearing. Standard bearing size is 22 mm. Any other cannot be found in our selection.
Inner diameter is the diameter of the hole in the bearing. Standard is 8 mm.
Weight limit is directly dependent on the bearing's ABEC classification. The higher the ABEC classification, the higher the weight limit. It is not recommended to exceed the weight limit since the bearings could get damaged and not be able to work properly.
The number of bearings you need depends on the number of wheels your kick scooter, skateboard or skates have. For each wheel, you need two pcs of bearings. If you want to replace all bearings, you need four for scooters, 16 for in-line skates and 8 for skateboard.
