Longboard Motor WORKER Wheelero - SPECIAL OFFER
Set consisting of motor, battery and trucks, suitable for street boards, wireless remote control, 2 speed modes, reverse mode.
Recommended accessories
- Description
- Parameters
- Alternatives (1)
Longboard Motor WORKER Wheelero
The Longboard Motor WORKER Wheelero will turn your board into a cool vehicle. All you have to do is replace the original trucks with this set consisting of a motor, battery and new trucks. Integrated into the rear wheel, the motor is powered by a removable/replaceable lithium battery (which is included). However, you may also buy a replacement battery.
The Longboard Motor WORKER Wheelero is controlled with an ergonomic, wireless remote control, which allows you to regulate speed (max speed: 20kph) and brake. Moreover, the remote control also allows you to switch to the reverse mode and go in the opposite direction. Beginners may also appreciate the safer, slow speed mode.
The 66mm wheels will deal with an uneven surface. Moreover, they also provide excellent stability on quality surfaces, e.g. paved roads, bike trails, skate parks. The wide, 5” aluminum trucks allow for easy turning. You may also appreciate the 608Z bearings.
The easily removable battery (without having to remove the entire trucks) makes the Longboard Motor WORKER Wheelero suitable especially for longboards with 36” decks and larger. However, since the battery can also be charged without having to be removed from the set, this set is also suitable for mini longboards, skateboards and penny boards with 27” decks and larger.
Technical description:
- 2 speed modes
- Reverse mode
- Removable battery – dust and water resistant (IP4/6)
- Wireless remote control with battery status indicator
- Motor power: 160W
- Max speed: 20kph
- Max slope: 10°
- Battery type: lithium
- Charging time: ca. 90 minutes
- Battery voltage: 36V
- Battery capacity: 2,200mAh
- Battery power: 79.2Wh
- Input voltage: 100-240V
- Trucks screw base: 53x42mm
- Deck width: 5”
- Wheel size: 66x51mm
- Wheel hardness: 85A
- Wheel material: PU rubber
- Bearings: 608Z CHL
- Weight limit: 130kg
- Dimensions: 360 x 250 x 105mm
- Weight: 2.8kg
- For 36V battery
- Set contains:
- Front truck
- Rear truck with wheel-integrated motor and battery case
- Removable battery
- Power adaptor
- Wireless remote control
- Suitable for 36”+ longboards (quick battery replacement)
- Also suitable for 27”+ mini longboards, skateboards and penny boards
Longboard Motor WORKER Wheelero - Product parameters
The ABEC-1 through ABEC-9 scale denotes the presision of the manufacture process. The higher the number, the more precisely the bearings are made (smaller margin). Other scales are used mainly on children's skates.
These days, most skateboard, penny board and longboard wheels are usually made of the same material - polyurethane (PU) with various admixtures. It's because these wheels have good riding qualities and are resistant to damage. Wheels made of PVC are recommended mainly for children. Their advantage is a low price.
By observing the weight limit of the product, you significantly increase its service life and prevent it from wearing down prematurely. It is not recommended to exceed this limit.
Wheel hardness between 76A and 90A is ideal for casual skating.
Wheel hardness over 90A is better suitable for speed and race skating.